mark-next-changeset-ran-sql

Last updated: January 21, 2026

The mark-next-changeset-ran-sql command is a helper command that inspects the SQL Liquibase will run while using the mark-next-changeset-ran command.

Uses

The mark-next-changeset-ran-sql command is used to inspect the raw SQL before running the mark-next-changeset-ran command, so you can correct any issues that may arise before running the command. Liquibase uses the raw SQL to mark the next changeset you apply as executed in your database and to keep that changeset in the changelog as a record assuming that it has already been deployed.

Syntax

To run the mark-next-changeset-ran-sql command, specify the driver, classpath, and URL in the Liquibase properties file. You can also specify these properties in your command line.

Then run the mark-next-changeset-ran-sql command:

liquibase mark-next-changeset-ran-sql --changelog-file=example-changelog.xml

Note: The username and password attributes are not required for connections and systems which use alternate means of authentication. Also, you can specify database credentials as part of the url attribute.

Parameters

Global parameters

Attribute	Definition	Requirement
`--output-file=<string>`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`--changelog-file=<string>`	The root changelog	Required
`--url=<string>`	The JDBC database connection URL.	Required
`--context-filter=<string>`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`--default-catalog-name=<string>`	Name of the default catalog to use for the database connection	Optional
`--default-schema-name=<string>`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`--driver=<string>`	The JDBC driver class	Optional
`--driver-properties-file=<string>`	The JDBC driver properties file	Optional
`--label-filter=<string>`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`--password=<string>`	Password to connect to the target database.	Optional
`--username=<string>`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`globalArgs: { output-file: "<string>" }`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`cmdArgs: { changelog-file: "<string>" }`	The root changelog	Required
`cmdArgs: { url: "<string>" }`	The JDBC database connection URL.	Required
`cmdArgs: { context-filter: "<string>" }`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`cmdArgs: { default-catalog-name: "<string>" }`	Name of the default catalog to use for the database connection	Optional
`cmdArgs: { default-schema-name: "<string>" }`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`cmdArgs: { driver: "<string>" }`	The JDBC driver class	Optional
`cmdArgs: { driver-properties-file: "<string>" }`	The JDBC driver properties file	Optional
`cmdArgs: { label-filter: "<string>" }`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`cmdArgs: { password: "<string>" }`	Password to connect to the target database.	Optional
`cmdArgs: { username: "<string>" }`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`liquibase.outputFile: <string>`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`liquibase.command.changelogFile: <string>` `liquibase.command.markNextChangesetRanSql.changelogFile: <string>`	The root changelog	Required
`liquibase.command.url: <string>` `liquibase.command.markNextChangesetRanSql.url: <string>`	The JDBC database connection URL.	Required
`liquibase.command.contextFilter: <string>` `liquibase.command.markNextChangesetRanSql.contextFilter: <string>`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`liquibase.command.defaultCatalogName: <string>` `liquibase.command.markNextChangesetRanSql.defaultCatalogName: <string>`	Name of the default catalog to use for the database connection	Optional
`liquibase.command.defaultSchemaName: <string>` `liquibase.command.markNextChangesetRanSql.defaultSchemaName: <string>`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`liquibase.command.driver: <string>` `liquibase.command.markNextChangesetRanSql.driver: <string>`	The JDBC driver class	Optional
`liquibase.command.driverPropertiesFile: <string>` `liquibase.command.markNextChangesetRanSql.driverPropertiesFile: <string>`	The JDBC driver properties file	Optional
`liquibase.command.labelFilter: <string>` `liquibase.command.markNextChangesetRanSql.labelFilter: <string>`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`liquibase.command.password: <string>` `liquibase.command.markNextChangesetRanSql.password: <string>`	Password to connect to the target database.	Optional
`liquibase.command.username: <string>` `liquibase.command.markNextChangesetRanSql.username: <string>`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`JAVA_OPTS=-Dliquibase.outputFile=<string>`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`JAVA_OPTS=-Dliquibase.command.changelogFile=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.changelogFile=<string>`	The root changelog	Required
`JAVA_OPTS=-Dliquibase.command.url=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.url=<string>`	The JDBC database connection URL.	Required
`JAVA_OPTS=-Dliquibase.command.contextFilter=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.contextFilter=<string>`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`JAVA_OPTS=-Dliquibase.command.defaultCatalogName=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.defaultCatalogName=<string>`	Name of the default catalog to use for the database connection	Optional
`JAVA_OPTS=-Dliquibase.command.defaultSchemaName=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.defaultSchemaName=<string>`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`JAVA_OPTS=-Dliquibase.command.driver=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.driver=<string>`	The JDBC driver class	Optional
`JAVA_OPTS=-Dliquibase.command.driverPropertiesFile=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.driverPropertiesFile=<string>`	The JDBC driver properties file	Optional
`JAVA_OPTS=-Dliquibase.command.labelFilter=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.labelFilter=<string>`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`JAVA_OPTS=-Dliquibase.command.password=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.password=<string>`	Password to connect to the target database.	Optional
`JAVA_OPTS=-Dliquibase.command.username=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.username=<string>`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`LIQUIBASE_OUTPUT_FILE=<string>`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`LIQUIBASE_COMMAND_CHANGELOG_FILE=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_CHANGELOG_FILE=<string>`	The root changelog	Required
`LIQUIBASE_COMMAND_URL=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_URL=<string>`	The JDBC database connection URL.	Required
`LIQUIBASE_COMMAND_CONTEXT_FILTER=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_CONTEXT_FILTER=<string>`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`LIQUIBASE_COMMAND_DEFAULT_CATALOG_NAME=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_DEFAULT_CATALOG_NAME=<string>`	Name of the default catalog to use for the database connection	Optional
`LIQUIBASE_COMMAND_DEFAULT_SCHEMA_NAME=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_DEFAULT_SCHEMA_NAME=<string>`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`LIQUIBASE_COMMAND_DRIVER=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_DRIVER=<string>`	The JDBC driver class	Optional
`LIQUIBASE_COMMAND_DRIVER_PROPERTIES_FILE=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_DRIVER_PROPERTIES_FILE=<string>`	The JDBC driver properties file	Optional
`LIQUIBASE_COMMAND_LABEL_FILTER=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_LABEL_FILTER=<string>`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`LIQUIBASE_COMMAND_PASSWORD=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_PASSWORD=<string>`	Password to connect to the target database.	Optional
`LIQUIBASE_COMMAND_USERNAME=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_USERNAME=<string>`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`--output-file=<string>`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`--changelog-file=<string>`	The root changelog	Required
`--url=<string>`	The JDBC database connection URL.	Required
`--context-filter=<string>`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`--default-catalog-name=<string>`	Name of the default catalog to use for the database connection	Optional
`--default-schema-name=<string>`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`--driver=<string>`	The JDBC driver class	Optional
`--driver-properties-file=<string>`	The JDBC driver properties file	Optional
`--label-filter=<string>`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`--password=<string>`	Password to connect to the target database.	Optional
`--username=<string>`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`globalArgs: { output-file: "<string>" }`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`cmdArgs: { changelog-file: "<string>" }`	The root changelog	Required
`cmdArgs: { url: "<string>" }`	The JDBC database connection URL.	Required
`cmdArgs: { context-filter: "<string>" }`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`cmdArgs: { default-catalog-name: "<string>" }`	Name of the default catalog to use for the database connection	Optional
`cmdArgs: { default-schema-name: "<string>" }`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`cmdArgs: { driver: "<string>" }`	The JDBC driver class	Optional
`cmdArgs: { driver-properties-file: "<string>" }`	The JDBC driver properties file	Optional
`cmdArgs: { label-filter: "<string>" }`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`cmdArgs: { password: "<string>" }`	Password to connect to the target database.	Optional
`cmdArgs: { username: "<string>" }`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`liquibase.outputFile: <string>`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`liquibase.command.changelogFile: <string>` `liquibase.command.markNextChangesetRanSql.changelogFile: <string>`	The root changelog	Required
`liquibase.command.url: <string>` `liquibase.command.markNextChangesetRanSql.url: <string>`	The JDBC database connection URL.	Required
`liquibase.command.contextFilter: <string>` `liquibase.command.markNextChangesetRanSql.contextFilter: <string>`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`liquibase.command.defaultCatalogName: <string>` `liquibase.command.markNextChangesetRanSql.defaultCatalogName: <string>`	Name of the default catalog to use for the database connection	Optional
`liquibase.command.defaultSchemaName: <string>` `liquibase.command.markNextChangesetRanSql.defaultSchemaName: <string>`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`liquibase.command.driver: <string>` `liquibase.command.markNextChangesetRanSql.driver: <string>`	The JDBC driver class	Optional
`liquibase.command.driverPropertiesFile: <string>` `liquibase.command.markNextChangesetRanSql.driverPropertiesFile: <string>`	The JDBC driver properties file	Optional
`liquibase.command.labelFilter: <string>` `liquibase.command.markNextChangesetRanSql.labelFilter: <string>`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`liquibase.command.password: <string>` `liquibase.command.markNextChangesetRanSql.password: <string>`	Password to connect to the target database.	Optional
`liquibase.command.username: <string>` `liquibase.command.markNextChangesetRanSql.username: <string>`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`JAVA_OPTS=-Dliquibase.outputFile=<string>`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`JAVA_OPTS=-Dliquibase.command.changelogFile=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.changelogFile=<string>`	The root changelog	Required
`JAVA_OPTS=-Dliquibase.command.url=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.url=<string>`	The JDBC database connection URL.	Required
`JAVA_OPTS=-Dliquibase.command.contextFilter=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.contextFilter=<string>`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`JAVA_OPTS=-Dliquibase.command.defaultCatalogName=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.defaultCatalogName=<string>`	Name of the default catalog to use for the database connection	Optional
`JAVA_OPTS=-Dliquibase.command.defaultSchemaName=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.defaultSchemaName=<string>`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`JAVA_OPTS=-Dliquibase.command.driver=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.driver=<string>`	The JDBC driver class	Optional
`JAVA_OPTS=-Dliquibase.command.driverPropertiesFile=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.driverPropertiesFile=<string>`	The JDBC driver properties file	Optional
`JAVA_OPTS=-Dliquibase.command.labelFilter=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.labelFilter=<string>`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`JAVA_OPTS=-Dliquibase.command.password=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.password=<string>`	Password to connect to the target database.	Optional
`JAVA_OPTS=-Dliquibase.command.username=<string>` `JAVA_OPTS=-Dliquibase.command.markNextChangesetRanSql.username=<string>`	Username to connect to the target database.	Optional

Global parameters

Attribute	Definition	Requirement
`LIQUIBASE_OUTPUT_FILE=<string>`	File path to where the command output will be written. If not specified, output goes to `STDOUT`. See `--output-file`.	Optional

Command parameters

Attribute	Definition	Requirement
`LIQUIBASE_COMMAND_CHANGELOG_FILE=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_CHANGELOG_FILE=<string>`	The root changelog	Required
`LIQUIBASE_COMMAND_URL=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_URL=<string>`	The JDBC database connection URL.	Required
`LIQUIBASE_COMMAND_CONTEXT_FILTER=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_CONTEXT_FILTER=<string>`	Specifies the changeset contexts to match. Contexts are tags you can add to changesets to control which changesets are executed in any particular migration run. Note: If you use Liquibase 4.23.0 or earlier, use the syntax `--contexts` instead of `--context-filter`.	Optional
`LIQUIBASE_COMMAND_DEFAULT_CATALOG_NAME=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_DEFAULT_CATALOG_NAME=<string>`	Name of the default catalog to use for the database connection	Optional
`LIQUIBASE_COMMAND_DEFAULT_SCHEMA_NAME=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_DEFAULT_SCHEMA_NAME=<string>`	Name of the default schema to use for the database connection. If `defaultSchemaName` is set, then objects do not have to be fully qualified. This means you can refer to just `mytable` instead of `myschema.mytable`. Note: In the properties file and `JAVA_OPTS` only: in 4.18.0 and earlier, specify this parameter using the syntax `defaultSchemaName`. In 4.19.0 and later, use the syntax `liquibase.command.defaultSchemaName`. Note: In Liquibase 4.12.0 and later, you can use mixed-case schema names if you set `--preserve-schema-case` to `true`. However, in Liquibase 4.12.0–4.22.0, the Liquibase validator still throws a `DatabaseException` error if you specify a mixed-case value of `defaultSchemaName`. In 4.23.0 and later, the Liquibase validator accepts any casing.	Optional
`LIQUIBASE_COMMAND_DRIVER=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_DRIVER=<string>`	The JDBC driver class	Optional
`LIQUIBASE_COMMAND_DRIVER_PROPERTIES_FILE=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_DRIVER_PROPERTIES_FILE=<string>`	The JDBC driver properties file	Optional
`LIQUIBASE_COMMAND_LABEL_FILTER=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_LABEL_FILTER=<string>`	Specifies the changeset labels to match. Labels are tags you can add to changesets to control which changesets will be executed in any migration run.	Optional
`LIQUIBASE_COMMAND_PASSWORD=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_PASSWORD=<string>`	Password to connect to the target database.	Optional
`LIQUIBASE_COMMAND_USERNAME=<string>` `LIQUIBASE_COMMAND_MARK_NEXT_CHANGESET_RAN_SQL_USERNAME=<string>`	Username to connect to the target database.	Optional

Output

Liquibase Community 4.9.1 by Liquibase -- ********************************************************************* -- SQL to add all changesets to database history table -- ********************************************************************* -- Change Log: example-changelog.sql -- Ran at: 5/6/22, 9:44 AM -- Against: DBUSER@jdbc:h2:tcp://localhost:9090/mem:dev -- Liquibase version: 4.9.1 -- ********************************************************************* -- Lock Database UPDATE PUBLIC.DATABASECHANGELOGLOCK SET LOCKED = TRUE, LOCKEDBY = 'DESKTOP-SQVSSV2 (192.168.1.179)', LOCKGRANTED = NOW() WHERE ID = 1 AND LOCKED = FALSE; -- Release Database Lock UPDATE PUBLIC.DATABASECHANGELOGLOCK SET LOCKED = FALSE, LOCKEDBY = NULL, LOCKGRANTED = NULL WHERE ID = 1; Liquibase command 'mark-next-changeset-ran-sql' was executed successfully.